Inca Furniture Reviver & Oil Polish 250ml

Description

For tired and dry surfaces there are 2 methods depending on the condition of the furniture.

For furniture where the surface is still clean but looking a bit dull, faded and dry apply the furniture reviver with a clean soft cloth going evenly with the grain. Get a second soft dry cloth and remove excess and buff. Sometimes you may need some extra cloth to buff to smooth, silky finish.

For timber furniture that’s dirt, aged and has a build up of old wax and grime, the best way is to rejuvenate the wood furniture with Inca furniture reviver and some “0000” Superfine Grade steel wool.

Apply Inca Furniture Reviver to the surface with a piece of superfine steel wool and spread along the furniture going in the same direction as the grain, “never in a circular motion” always make sure that the surface and steel wool are well lubricated with furniture reviver at all times.

Removing light surface scratching

To remove light hazy surface scratching and to rejuvenate wood furniture is virtually the same process.

Apply “Inca Furniture Reviver” to the surface with a piece of “0000” Superfine steel wool and spread along the furniture going in the same direction as the grain, “never in a circular motion” always make sure the that surface and steel wool are well lubricated with reviver at all times.

If you are attempting to move light surface scratches rub the surface gently until you see the scratches disappear and then stop and buff off any excess reviver and give the furniture a polish with a good quality beeswax. The same procedure applies when rejuvenating a “dull” or “tired” looking piece of furniture.

Warning: There are many different brands of “Furniture Revivers” on the market and it’s important to make sure you choose the correct type as some are only suitable for dark wood furniture and some are only suitable for use on any color wood furniture light or dark. Make sure you read the label for instructions before purchasing.

Handy Tip: Before starting any job test all products and procedures if possible in an inconspicuous area first, to make sure there are no adverse reactions then proceed with caution.

Important: Never leave cloths or steel wool that have been in contact with revivers on the surface of your furniture after you’ve finished, as reactions and damage can occur in a very short space of time.

Save