How to Use Aussie Furniture Care Pure Hemp Oil Furniture Finish & Polish.
Here are some important steps and instructions for Restoring, Sealing & Protecting Raw Wood, Chalk Painted Finishes & Old, Worn & Dried Out Furniture
These instructions are the same for treating wooden chopping boards, wooden bowls and utensils.
This is important:
Before you start make sure your project is clean and free from dust.
If your applying the oil to a painted piece make sure the paint is completely dry.
Spread the oil liberally and evenly across the surface with your brush, cloth or sponge and wipe any excess oil away.
After applying your first coat leave it for around 12 hours and then using a fresh lint free cloth buff it off.
If you want to add more sheen just keep turning the cloth and continue to buff.
If you feel that the item is still a bit dry apply a second coat and repeat the process. If you apply a second coat the surface you are treating it won’t absorb as much oil and will be easier to buff to higher sheen.
Note: A hard protective coating will be achieved after approx 30days curing time. The item you’ve treated can still be used during that time
How to use Pure Hemp Oil as a Furniture Polish for Furniture That’s in Good Condition
Spread the oil liberally and evenly across the surface with soft lint free cloth and wipe any excess oil away.
With a second dry and soft lint free cloth buff the surface to a soft sheen. If you want more sheen you can continue to buff with a fresh lint free cloth.
You can get your Aussie Furniture Care Pure Hemp Oil Furniture Finish & Polish here