“0000” Superfine Steel Wool

"0000" steel wool, also known as superfine steel wool is used extensively by the French polishing & antique restoration trade for a variety of different tasks including removing light scratches and imperfections on wood furniture. It’s also used for cutting back between coats of French polishes, varnishes, and oil finishes.

If your looking to remove light surface scratching or to just rejuvenate some tired and dry timber furniture apply some furniture reviver or antique oil on the surface with some "0000" Superfine steel wool.

"0000" Superfine steel woolYou can also remove old wax and built up dirt using this method.

Other Uses

Other uses include removing paint spots or stains from wood, cleaning polished metals such as bronze, copper, chrome, stainless steel, and aluminum.

You can also clean glass, marble and porcelin as long as you use the Superfine Steel Wool with soapy water.

super fine steel wool “0000″ Superfine Grade Steel Wool makes an excellent alternative to sandpaper when you only need an abrasive that creates a smooth, uniform pattern on a delicate surface.

“oooo” Superfine Steel Wool 50gr Packet. 

“oooo” Superfine Steel Wool 500gr Roll.

How to use:

To avoid cutting your hands, unroll the steel wool to its full length, and by starting at the top, pull down the length to make thin strips, which you can then roll into balls or pads.

The pad shape aids the “flat palming” action used in applying the wax polish or furniture reviver. It acts the same way as a very fine sandpaper only less abrasive.

Handy Tip

When you use the superfine steel wool always make sure you rub along the grain and not in a circular motion.

If you are working on one area of the surface always go over the complete surface area to create a consistent finish otherwise you could end up with area looking different to the rest of the surface.

“0000″ Superfine Steel Wool is available in 50gram packs and 500gr rolls:

Related Products: Furniture Wax  Antique Oil  Orange Oil   Furniture Reviver